Metal crusher, also known as metal crusher, is a machine for crushing waste metal materials, mainly composed of crusher blade group, bearing box, box bracket, feeding system, power system, electrical control system, etc., through the supporting conveyor, host, unloader, sorting machine to form a complete production line. Metal crusher can deal with various types of metal waste, including cans, paint buckets, waste household appliances, bicycles, auto parts, waste metal furniture, cable and wire, metal pressing block, aluminum profiles, iron sheet, copper products, etc., can remove metal magazines, separate and purify different broken materials, can also choose the appropriate crushing mode according to the nature of the material, Control the size of the broken material to meet different needs.

Plastic steel is widely used as a new type of building materials, due to its physical properties such as rigidity, elasticity, excellent anti-aging properties, usually used as a substitute for copper, zinc, aluminum and other non-ferrous metals, plastic steel materials have a good tolerance to many chemical substances, can be used in the risk environment for a long time. Compared with some traditional metal materials, the production cost of plastic steel is relatively low, and the processing is easier, so the plastic steel products are more competitive in price.
For plastic steel recycling, the first step is to crush the plastic steel products to be recycled to a manageable or reusable size, plastic steel crusher through the motor to drive the cutter cutter high speed rotation, and the fixed knife to form a relative motion, the use of the gap between the knife and the fixed knife will be plastic steel material shear, tear and extrusion, so that the bulk of plastic steel material broken into small pieces or particles, Complete the task of size reduction.

Double-shaft shredder is a kind of mechanical equipment used to crush, break and separate various waste materials, which is widely used in the fields of waste treatment, recycling and resource recovery. Two-axis shredder adopts microcomputer (PC) automatic control system, with start, stop, reverse and overload automatic reverse control functions, with low speed, large torque, low noise characteristics. Bearing seat adopts split type, easy to disassemble and replace, suitable for shredding large, extra thick and difficult to tear materials.

Polyvinyl chloride, referred to as PVC(Polyvinyl chloride), is vinyl chloride monomer (vinyl chloride monomer, referred to as VCM) in peroxide, azo compounds and other initiators; Or under the action of light and heat according to the mechanism of free radical polymerization polymerization polymer. PVC crusher is mainly used to break waste PVC products, such as PVC pipes, profiles, films, etc., into smaller particles or fragments in order to facilitate subsequent recycling or treatment.

Wood crusher for many years with its superior performance, superior quality, high cost performance and is widely used by domestic and foreign merchants. It is a special equipment for preparing high-quality wood chips, which is suitable for paper mills, particleboard factories, fiberboard factories, wood chip production bases and wood chip export bases. High quality industrial wood chips can be cut into logs, small diameter wood, etc., uniform length, smooth incision, uniform thickness. They can also be used to cut branches, boards, etc.

Eddy current sorter is a kind of equipment that realizes material classification and separation by using eddy current effect. It induces eddy current in the conductor material through alternating magnetic field, and realizes the separation of materials with different conductive properties by using the interaction between the reverse electromagnetic field generated by eddy current and the primary magnetic field. The equipment is widely used in waste recycling, metal recycling and other fields. The working principle of the eddy current sorter is based on the eddy current effect. The eddy current sorter uses an electromagnet to generate an alternating magnetic field, the frequency and strength of which can be adjusted according to different application requirements. The sensor is mounted on the workbench and is used to detect the eddy current generated by the material. The sensor sends the detected signal to the control system for processing. The control system classifies and separates the materials according to the signals from the sensors. According to the strength and characteristics of the eddy current, the control system can determine the types of different materials and separate them through the appropriate device. The separated material is collected into the appropriate container for subsequent processing and utilization.

Scrap car dismantling line is a production line specially used for dismantling scrap cars. It first pretreats the vehicle, such as empting the oil, etc., and then refines it through mechanical and manual methods, classifying parts and materials for storage. After that, metals, plastics, rubber, glass, electronic components, etc. are recycled and reused, while hazardous wastes such as waste oil and waste liquid are strictly treated to ensure environmental compliance. The whole process not only saves resources, but also protects the environment and promotes circular economy.

With the wide application of lithium-ion batteries in new energy vehicles, power tools, energy storage and other fields, a large number of used lithium batteries have also entered the market, so the recycling of used lithium batteries is a key issue. Lithium battery crushing and sorting equipment is the key equipment in the recycling process of waste lithium batteries, its main function is to break, disassemble, material separation and valuable metal extraction of waste lithium batteries. Through efficient and environmentally friendly crushing and sorting technology, it not only improves the recovery rate of resources, but also reduces the pollution to the environment, and realizes the recycling of resources and sustainable economic development.

Gantry shears are a kind of heavy equipment used for metal cutting, which are widely used in the fields of scrap recycling, metal processing and automobile dismantling. It is hydraulically driven, has a strong shear force and high shear speed, and can quickly cut scrap metal, steel plates or profiles into the required size. Modern gantry shears are usually equipped with automated control systems to support manual, semi-automatic and fully automatic operation, and some equipment also has a fixed size cutting function to improve production efficiency. Its fuselage structure is stable, the key components are made of high-strength materials, and the service life is long. At the same time, the equipment is equipped with safety protection devices to ensure the safety of operators. With the characteristics of high efficiency, energy saving and safety, gantry scissors have become an indispensable and important tool in the metal processing and recycling industry.

Metal press is a kind of metal scrap through high pressure cold pressing molding equipment, mainly used for processing metal scraps, scraps, etc., so that it is compressed into regular chunks, easy to store, transport and recycling. The equipment adopts full hydraulic drive, stable work, low noise, high degree of automation, simple and safe operation. It is widely used in steel plants, non-ferrous metal plants, smelters and other industries, can effectively reduce the volume of waste, improve the recovery value.

Metal baler is a kind of equipment used to compress metal raw materials such as scrap metal scraps, scrap steel, scrap aluminum, scrap copper, disassembled car shells, waste oil drums into regular shapes such as cuboid, cylinder or octagonal charge by hydraulic system. Its main function is to reduce the volume of metal waste, which is convenient for storage, transportation and subsequent smelting reuse.

Hydraulic shredder is a kind of equipment that uses hydraulic system to drive the tool to break and shred waste materials, which is widely used in the pretreatment of solid waste. Its main function is to tear large or difficult to handle materials (such as plastic, metal, wood, rubber, etc.) into smaller particles for subsequent recycling or treatment. The hydraulic shredder has the characteristics of high efficiency crushing, low energy consumption, low noise, low maintenance cost, and is equipped with overload protection and automatic reversal function to ensure the safe and reliable operation of the equipment.